How To Install Map Light/Dome Bulbs in 2005-2012 Mustangs

This installment of writeups goes over the installation of LED dome light bulbs on the 2005-2009 Mustangs.

Tools Required:

  • None

You first want to remove the cover to access the dome bulbs. Simply grasp the cover firmly and pull down.

Next, use your thumb or a thin point and depress the tab holding the harness to the grey connector. Once you release the tab, gently pull the dome bulb cover away.

Take the assembly to a clean work area to prepare the installation of the new bulbs. There are two separate bulbs in the housing. Remove the bulbs by pulling them straight out.

Now, remove the stock bulbs and re-install your new LED bulbs. Once this is done, you are now ready to re-install the dome housing back into the vehicle. Remember to plug the grey connector back in the harness. Finally, line up the tabs on the dome housing as shown below.

Check to make sure your lights work and that completes the installation. Now you have a brighter light to help make things easier to see inside your Stang!

You can find our LED map light/dome bulbs by clicking the following links: White LED Map/Dome BulbsBlue LED Map/Dome Bulbs

About these ads

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s