This installment of writeups goes over the installation of LED dome light bulbs on the 2005-2009 Mustangs.
You first want to remove the cover to access the dome bulbs. Simply grasp the cover firmly and pull down.
Next, use your thumb or a thin point and depress the tab holding the harness to the grey connector. Once you release the tab, gently pull the dome bulb cover away.
Take the assembly to a clean work area to prepare the installation of the new bulbs. There are two separate bulbs in the housing. Remove the bulbs by pulling them straight out.
Now, remove the stock bulbs and re-install your new LED bulbs. Once this is done, you are now ready to re-install the dome housing back into the vehicle. Remember to plug the grey connector back in the harness. Finally, line up the tabs on the dome housing as shown below.
Check to make sure your lights work and that completes the installation. Now you have a brighter light to help make things easier to see inside your Stang!