Mustang Vinyl Lower Rear Bumper Insert Installation
- Spray bottle
- Liquid soap
- Terry cloth or towel
First start off by making your soapy solution by combining three to four drops of dishwashing detergent with warm water
Next, you’ll want to thouroughly clean and prep the area for instalaltion. Use alcohol to clean any dirt or debris from the lower bumper area.
Once everything is nice and dry, you’ll now be ready for installation. Peel off the backing of the vinyl overlay. Be careful not to let it touch any surface other than the vehicle.
Spray the soapy solution over the entire lower bumper area.
Align the vinyl in place and use a squeegee to apply it to the vehicle. Work from the center of the vinyl to the edges, slowly pushing any air bubbles and excess solution out from under the decal. It may take a few minutes until the vinyl begins to adhere to the vehicle.
Finish up by wiping off any excess solution from the body of your Stang.
Visit StangMods for more vinyl Mustang decals.