Our popular 99-04 vinyl decklid panel is a fast and affordable way to give your Mustang an aggressive look & stand out from the crowd. This automotive grade (wont leave nasty residue) adhesive vinyl covering comes in either gloss black, carbon fiber or matte black. All of our vinyl overlays come with a free squeegee to help with the install. These decklid overlays are a very popular seller and have been a huge success over the years for V6, GT, and Cobras alike. Check out our full line of dress-up vinyl overlays here: http://www.stangmods.com/Mustang-Graphics-Vinyl-s/224.htm
- Squeegee (Included)
- Spray bottle
- Liquid soap
- Terry cloth or towel
First remove any and all emblems including the Ford Oval emblem and any other emblem that your specific model came with. Also remove your license plate.
Next, use rubbing alcohol to wash all wax and dirt from the surface where the decklid panel will be installed.
Make a soapy solution of by combining three to four drops of dish washing detergent with warm water.
Spray the solution over the decklid area where the new vinyl overlay will be installed.
Once the area is saturated, start with one section at a time and peel off the paper backing material from the black vinyl.
Align the vinyl in place and use a squeegee to apply it to the vehicle. Work from the center of the vinyl to the edges, slowly pushing any air bubbles and excess solution out from under the decal. Please be patient with this procedure. It may take several minutes for the vinyl to finally adhere. Repeat this procedure for the other two sections and your done!
Use your terry cloth towel to wipe off any excess solution from your Stang.