Installing StangMods’ Mustang Shorty Antennas

Installing a shorty antenna on your 94-09 Mustang is a very simple process that takes less than 5 minutes. We go over the process in this write-up.

Tools Required:

  • 3/8 Inch Wrench (optional)

The first step is getting the stock fishing rod-like antenna off of the vehicle. We were lucky and able to remove the antenna by using our bare thumb and index finger. Turn it counter clockwise and it will come right off. If you cannot unscrew it by hand, use a 3/8 wrench to do the job.

After unscrewing the stock antenna…

Your new shorty antenna comes with one threaded adapter base. Screw the fatter end of the threaded base into the stock antenna location as shown below.

Now, simply screw on the new shorty antenna onto the adapter base in a clock-wise motion.

Your installation is now complete!

You can find our universal fit shorty antennas here: StangMods Shorty Antennas On StangMods.com